Compensated Neutron (GCN)

Compensated Neutron (GCN)

The Compensated Neutron module provides an environmentally compensated porosity log in mud-filled open holes. An alternative epithermal detector configuration is available for air/gas filled holes. The tool design has been optimised to provide good performance at acceptable logging speeds while still using a relatively small 92GBq 241Am-Be source. It is combinable with the Litho-Density and Dual Induction log in a single run. Principle of Measurement: The Compensated Neutron measurement uses two 3 He proportional detectors and a side-door entry sealed neutron source. Fast neutrons emitted by the source are scattered and slowed down by light elements (principally hydrogen) in the formation. The ratio of the neutron flux reaching the detectors depends on the formation hydrogen index/formation porosity. Neutron porosity measurements are affected by the borehole environment. These effects are compensated in software by algorithms calculated by Monte Carlo modelling and benchmarked to standards at the Callisto facility in Leicestershire, UK.
  • Highlights
  • Features
  • Specification
  • Models
  • Standards
  • Review (2)

Compensated Neutron (GCN) is a professional well logging instrument, and this Compensated Neutron (GCN) Price in Bangladesh page provides essential information for professionals looking for dependable formation evaluation equipment. Designed to support neutron porosity measurements, the tool helps geoscientists and logging engineers assess formation characteristics and improve subsurface interpretation.

The instrument works by using neutron interaction with the surrounding formation to provide valuable information about hydrogen content and formation porosity. Its compensated design helps improve measurement reliability under changing borehole conditions, making it suitable for detailed formation evaluation and well logging operations.

Compensated Neutron (GCN) can support geological exploration, petroleum logging, reservoir evaluation, groundwater investigation, and other subsurface studies where reliable formation data is important. The measurements obtained from neutron logging can be used alongside other well logging data to develop a better understanding of lithology, porosity, and reservoir characteristics.

Designed for professional field use, the tool emphasizes dependable operation and durable construction. Its robust design helps it perform effectively in demanding borehole environments where logging equipment may be exposed to pressure, temperature variations, and continuous operational stress.

For drilling contractors, geological survey teams, petroleum engineers, and exploration companies, Compensated Neutron (GCN) can be a valuable addition to a modern well logging system. Its ability to provide consistent neutron-based formation information makes it useful for evaluating subsurface conditions and supporting technical decisions throughout exploration and reservoir assessment projects.

SPECIFICATION: The Compensated Neutron module provides an environmentally compensated porosity log in mud-filled open holes. An alternative epithermal detector configuration is available for air/gas filled holes. The tool design has been optimised to provide good performance at acceptable logging speeds while still using a relatively small 92GBq 241Am-Be source. It is combinable with the Litho-Density and Dual Induction log in a single run. Principle of Measurement: The Compensated Neutron measurement uses two 3 He proportional detectors and a side-door entry sealed neutron source. Fast neutrons emitted by the source are scattered and slowed down by light elements (principally hydrogen) in the formation. The ratio of the neutron flux reaching the detectors depends on the formation hydrogen index/formation porosity. Neutron porosity measurements are affected by the borehole environment. These effects are compensated in software by algorithms calculated by Monte Carlo modelling and benchmarked to standards at the Callisto facility in Leicestershire, UK. Example of logging data Compensated Neutron Module Source 2.27m (89.4”) SSN LSN Features Well characterised tool response based on computer calculations for limestone, sandstone and dolomite Fully digital telemetry combines with density, induction and other logging probes Low-activity source requirements for safe handling and cost reduction High-resolution measurement Maximum data sampling rate is 1cm (0.4”) Measurements Porosity ɸ Ratio long/short and raw counts Applications Porosity Lithology (in conjunction with other logs) Gas/light hydrocarbon detection Correlation between wells Operating Conditions Borehole type: fluid filled Ø:102mm (4") to 305mm (12") Specifications Diameter: 63mm (2.5”) Length: 2.27m (89.4”) Weight: 28kg (62lb) Max. temperature: 125°C Max. pressure: 86MPa (12,500psi) 3 He detectors offsets: 203 mm (8”) and 406 mm (16”) Porosity Range: -15% to 60% (limestone scale) Resolution: 0.6 PU in 152 mm (6”) borehole at 15% porosity Radius of investigation: 152 mm (6”) – 406 mm (16”) Part Numbers I003942 Compensated Neutron module Accessories: I013962 92 GBq 241Am-Be source I004124 Source holder I004122 Source transport pig I004123 Source handling tool set I004137 Field check jig I017411 Dual-band eccentraliser for neutron/telemetry.

2 Reviews For win Your Friends

Add Your Review

Your Rating:
Steven Rich – Sep 17, 2016:
How all this mistaken idea of denouncing pleasure and praising pain was born and I will give you a complete account of the system, and expound the actual teachings.
William Cobus – Aug 21, 2016:
There anyone who loves or pursues or desires to obtain pain itself, because it is pain sed, because occasionally circumstances occur some great pleasure.

Any question about the Compensated Neutron (GCN) ?

* indicates required fields

CAPTCHA


QC LAB SOLUTION

  Usually Replies Instantly!

Hello! How Can We Help You Today? Choose a question below to chat with us on WhatsApp.

Chat on WhatsApp

QC Lab Solution